 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ultra-Thin Process Sealed Tactiles Series JF Distinctive Characteristics Extremely low profile of .224" (5.7mm) from PCB to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination and allows automated soldering and cleaning. Minimal operating force and short stroke permit light touch operation. Dome contact gives crisp tactile and audible feedback to positively indicate circuit transfer and assures high reliability and long life. Space saving body dimensions provide for compact, side-by-side mounting on a standard grid. Crimped terminals ensure secure mounting and prevent dislodging during wave soldering. Terminal spacing conforms to standard .100" (2.54mm) PCB grid. Matching indicator available and shown at the end of Section M. Actual Size Common Bus Matrix These single pole, single throw switches can be used in a keyboard matrix and, using strapped terminals, achieve a common bus electrical configuration on a single-sided PC board. 5 1 2 9 3 13 X-Y Matrix These single pole, single throw switches can be arranged on a single-sided PC board matrix with strapped terminals to achieve an X-Y type electrical interconnection. 1 2 3 1 4 5 6 2 7 8 4 4 7 3 5 6 10 6 11 8 12 8 9 A 1 2 0 B 1 2 3 4 5 6 7 8 9 0 A B P C Te r m i n a t i o n s 1 2 3 4 5 6 7 8 9 10 11 12 13 9 6 A 0 B 7 = ON 5 4 3 P C Te rminations 1 234 567 1 2 3 4 5 6 7 8 9 0 A B = ON Keys (Switches) 7 Blue = PCB Trace Black = Switch Circuit 03-07 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com Keys (Switches) Ultra-Thin Process Sealed Tactiles Series JF General Specifications Electrical Capacity (Resistive Load) Low Level: 50mA @ 24V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Total Travel: 50 milliohms maximum 500 megohms minimum @ 250V DC 250V AC minimum for 1 minute minimum 500,000 operations minimum 500,000 operations minimum 3.0N for flush actuator 2.0N for sculptured actuator Flush Actuators .016" (0.4mm); Sculptured Actuator: .031" (0.8mm) Materials & Finishes Actuator: Case: Seal: Base: Movable Contact: Stationary Contacts: Terminals: Polyamide for spot illuminated; polycarbonate for full face Glass fiber reinforced polyamide Nitrile butadiene rubber Glass fiber reinforced polyester Phosphor bronze with silver plating Brass with silver plating Brass with silver plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: -25C through +70C (-13F through +158F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Cleaning: Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. Switches should not be operated or have any pressure on the actuators during cleaning. Full face illuminated models suitable only for bottom board spray wash to avoid contamination of the 2-layered actuator, which may compromise the aesthetics. Standards & Certifications UL Recognition or CSA Certification: The JF Series tactiles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Ultra-Thin Process Sealed Tactiles TYPICAL SWITCH ORDERING EXAMPLE Series JF JF POLE & CIRCUIT 15 SPST OFF 15 R P 2 ACTUATOR TYPES 1 Square Round Sculptured C C LED COLORS C E F Red Yellow Green (ON) ( ) = Momentary P TERMINALS Straight PC 2 3 ILLUMINATION R A Spot Full Face (with square actuator only) ACTUATOR COLORS Spot Illuminated C D F G H C E Red Orange Green Blue Gray Red Yellow Green *Full Face Illuminated DESCRIPTION FOR TYPICAL ORDERING EXAMPLE F JF15RP2CC Red LED for Spot Illumination SPST OFF-(ON) Circuit Round Red Actuator Straight PC Terminals *LED color must match actuator color. POLE & CIRCUIT Actuator Position ( ) = Momentary Normal Pole SP Model JF15 OFF (ON) Down 1 3 (+) (-) Switch Throw & Schematic LED Schematic Notes: Terminal numbers are shown on switch. LED circuit is isolated & requires external power source. SPST 2 4 NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Ultra-Thin Process Sealed Tactiles ILLUMINATION & ACTUATOR TYPES R 1 Spot Illumination Square Actuator Series JF A 2 Round Actuator Full Face Illumination Square Actuator 3 Sculptured Actuator 1 Actuator Colors Available: C, D, F, G, H Housing is black Color Codes: Actuator Colors Available: C, E, F Housing is black Yellow C Red D Orange E F Green G Blue H Gray Flexible Panel Design Versatile panel arrangements can be made to fit individual design needs. (1.7) .067 (5.08) .200 (3.6) .142 (22.86) .900 (6.7) .264 (3.6) .142 (5.72) .225 (6.0) Min .236 (1.04) .041 (27.94) 1.100 Spot Illumination (7.3) .287 (3.0) .118 (17.78) Typ .700 Full Face Illumination (17.78) Typ .700 TERMINALS P LED polarity marking Straight PC Terminals With isolated lamp circuit Further details in Typical Switch Dimensions LED COLORS & SPECIFICATIONS LEDs are supplied as an integral part of the switch. The electrical specifications shown are determined at a basic temperature of 25C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Spot Illumination Color Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage Current Reduction Rate Above 25C Ambient Temperature Range I FM IF VF VRM I F Red Full Face Illumination Green C Yellow E F Red C Yellow E Green F 40mA 30mA 1.7V 4V 0.67mA/C 40mA 30mA 2.2V 4V 0.67mA/C -25 ~ +70C 40mA 30mA 2.2V 4V 0.67mA/C 30mA 20mA 1.77V 4V 0.4mA/C 30mA 20mA 2.1V 4V 0.4mA/C -25 ~ +70C 30mA 20mA 2.3V 4V 0.4mA/C NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Ultra-Thin Process Sealed Tactiles TYPICAL SWITCH DIMENSIONS Spot Illuminated with Square Actuator (5.7) .225 (2.2) .087 (5.6) .220 (1.6) .063 (3.8) .150 (3.0) .118 (6.0) Min .236 (0.5) .020 (5.08) .200 (14.0) Sq .551 (12.7) .500 2 4 Series JF (5.08) .200 (0.2) Typ .008 + _ (5.08) .200 1 (13.95) .549 (11.43) .450 (8.85) .348 3 1 3 (5.08) .200 (12.7) .500 4 2 JF15RP1CC (16.4) Sq .646 (17.7) .697 (0.3) .012 (8.68) .342 (0.3) Typ .012 (3.6) .142 (10.16) .400 (10.16) .400 (0.8) Typ .031 (1.0) Dia Typ .039 Spot Illuminated with Round Actuator (5.7) .225 (2.2) .087 (5.6) .220 (1.6) .063 (3.8) .150 (3.0) .118 (6.0) Min .236 (0.5) .020 (5.08) .200 (5.08) .200 (0.2) Typ .008 + _ (5.08) .200 1 (13.95) .549 (11.43) .450 (14.0) Dia .551 2 4 (8.85) .348 (12.7) .500 4 2 3 1 3 (5.08) .200 (12.7) .500 JF15RP2CC (16.4) Sq .646 (17.7) .697 (0.3) .012 (8.68) .342 (0.3) Typ .012 (3.6) .142 (10.16) .400 (0.8) Typ .031 (10.16) .400 (1.0) Dia Typ .039 Spot Illuminated with Sculptured Actuator (2.2) .087 (5.6) .220 (1.6) .063 (5.7) .225 (3.8) .150 (3.0) .118 (6.0) Min .236 (0.5) .020 (5.08) .200 (5.08) .200 (0.2) Typ .008 + _ (5.08) .200 1 (13.95) .549 (11.43) .450 (14.0) Sq .551 3 (5.08) .200 (12.7) .500 (12.7) .500 2 4 (8.85) .348 3 1 4 2 JF15RP3CC (16.4) Sq .646 (17.7) .697 (0.3) .012 (1.7) .067 (8.68) .342 (0.3) Typ .012 (3.6) .142 (10.16) .400 (0.8) Typ .031 (10.16) .400 (1.0) Dia Typ .039 Full Face Illuminated with Square Actuator (7.3) .287 (2.7) .106 (13.5) .531 (3.0) Min .118 (3.0) .118 (0.5) Sq .020 - (5.08) .200 + + - (5.08) .200 (10.16) .400 (6.0) .236 (26.9) (7.3) 1.059 .287 (8.2) .323 (8.85) .348 (0.3) .012 (17.7) .697 (10.3) .406 (10.16) .400 3 1 3 1 (13.0) Sq .512 (12.7) .500 4 2 4 2 (12.7) .500 (16.4) .646 (0.3) Typ .012 (3.6) .142 (10.16) .400 (0.8) Typ .031 (10.16) .400 (1.0) Dia Typ .039 JF15AP1CC NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com 03-07 Ultra-Thin Process Sealed Tactiles LEGENDS Series JF Easily create and submit your own legends using our new on-line Legend Maker. Visit www.nkkswitches.com For other legend support options, customers may either contact the factory and request the JF Legend Packet, or utilize the general information and basic specifications presented below. LM (12.48) Sq .491 (14.0) Sq .551 Suggested Printable Area W PO ER O Recommended Print Method: Screen Print or Pad Print Epoxy based ink is recommended. Shaded areas are printable areas. NKK Switches * email: sales@nkkswitches.com * Phone (480) 991-0942 * Fax (480) 998-1435 * www.nkkswitches.com W PO ER (0.76) Typ .030 D (12.48) Dia .491 (14.0) Dia .551 Engraving is not recommended as an additional method for legends. Contact factory if engraving is required; it must be done before the actuator is assembled. O N (8.03) .316 (0.76) Typ .030 W O (9.6) .378 (11.13) .438 N N (6.0) .236 (1.52) Typ .060 (4.98) .196 (0.76) Typ .030 (13.5) .531 (11.98) .472 (0.76) Typ .030 (4.48) .176 (0.76) Typ .030 (11.48) Sq .452 (13.0) Sq .512 (0.76) Typ .030 Additional Methods 03-07 |
Price & Availability of JF15AP2HC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |